Chroma 62000D Series - Page 155

Remote Operation
5-29
Query Syntax:
SYSTem:VERSion:INTernal? [<Arg>]
Query Parameter:
Arg: Select subsystem: 1~2, 1: DSP-CPU1, 2: DSP-CPU2
Query Example:
SYSTem:VERSion:INTernal?
Return Example:
MAIN:0.70,PLD:0.27,PCB:01,UI:0.57
4. SYSTem:MODule:VERSion?
Description:
Queries the module version.
Query Syntax:
SYSTem:MODule:VERSion? <Arg1>[<,><Arg2>]
Query Parameter:
Arg1: Module No.: 1~3
Arg2: Module No.: 1~2, 1: AD, 2: DD
Query Example:
SYSTem:MODule:VERSion? 1,2
Return Example:
MAIN:0.90,BOOT:0_06,PLD:0.31,PCB:03
5. SYSTem:DATE
Description:
Sets the system date.
Syntax:
SYSTem:DATE <Arg1>,<Arg2>,<Arg3>
Parameter:
Arg1: Year (NR1)
Arg2: Month (NR1)
Arg3: Day (NR1)
Example:
SYSTem:DATE 2020,01,01
Query Syntax:
SYSTem:DATE?
Return Parameter:
<Arg1>,<Arg2>,<Arg3> same as the parameter.
Query Example:
SYSTem:DATE?
Return Example:
2020,01,01
6. SYSTem:TIME
Description:
Sets the system time.
Syntax:
SYSTem:TIME <Arg1><,><Arg2><,><Arg3>
Parameter:
<Arg1>: Hour (NR1)
<Arg2>: Minute (NR1)
<Arg3>: Second (NR1)
Example:
SYSTem:TIME 20,30,01
Query Syntax:
SYSTem:TIME?
Return Parameter:
<Arg1>,<Arg2>,<Arg3> same as the parameter.
Query Example:
SYSTem:TIME?
Return Example:
20,30,01
7. SYSTem:COMMunicate:CAN:CYClic:TIME
Description:
Sets the CAN cycle time.
Syntax:
SYSTem:COMMunicate:CAN:CYClic:TIME <NRf+>
Parameter:
0.001 to 3600
Example:
SYSTem:COMMunicate:CAN:CYClic:TIME 1.001
Query Syntax:
SYSTem:COMMunicate:CAN:CYClic:TIME?
Return Parameter:
<NRf+>
Query Example:
SYSTem:COMMunicate:CAN:CYClic:TIME?
Return Example:
1.001000e+00
8. SYSTem:COMMunicate:CAN:CYClic:ID
Description:
Sets the CAN cycle command ID.
Syntax:
SYSTem:COMMunicate:CAN:CYClic:ID <NRf+>
Parameter:
11bit: 0 to 2047 , 29bit: 0 to 536870911
Example:
SYSTem:COMMunicate:CAN:CYClic:ID 10
Query Syntax:
SYSTem:COMMunicate:CAN:CYClic:ID?
Return Parameter:
<NR1>