Programmable Bidirectional DC Power Supply 62000D Series
Operating and Programming Manual
3-12
Figure 3-15
3.2.3.2 Factory Setup
This function lets you to reset the DC power supply to its factory default settings.
1. In Menu page, tap “System Setup” and select “Factory Default”, the screen appears as
Figure 3-16 shows.
2. Tap Recall Factory Default. A warning message will prompt as Figure 3-17 shows. It will
remain the last configuration settings saved by you if No is selected, and return all
configurations to the factory default if Yes is selected.
Figure 3-16
To Next Page
Loading...
Need help?
General
