Chroma 62000D Series - SOURCE Subsystem

Remote Operation
5-17
Query Example:
CONFigure:INTERLOCK?
Return Example:
DISABLE
20. CONFigure:INTERLOCK:PULL
Description:
Executes the Safety Interlock input signal to enhance the
resistance control.
Syntax:
CONFigure:INTERLOCK:PULL <Arg>
Parameter:
<Arg>: LOW | HIGH
Example:
CONFigure:INTERLOCK:PULL LOW
Query Syntax:
CONFigure:INTERLOCK:PULL?
Return Parameter:
LOW | HIGH
Query Example:
CONFigure:INTERLOCK:PULL?
Return Example:
LOW
21. CONFigure:EXTON
Description:
Executes the External ON/OFF control.
Syntax:
CONFigure:EXTON <Arg>
Parameter:
<Arg>: DISABLE | ENABLE
Example:
CONFigure:EXTON DISABLE
Query Syntax:
CONFigure:EXTON?
Return Parameter:
DISABLE | ENABLE
Query Example:
CONFigure:EXTON?
Return Example:
DISABLE
22. CONFigure: EXTON:PULL
Description:
Executes the External ON/OFF input signal to enhance the
resistance control
Syntax:
CONFigure: EXTON:PULL <Arg>
Parameter:
<Arg>: LOW | HIGH
Example:
CONFigure: EXTON:PULL LOW
Query Syntax:
CONFigure: EXTON:PULL?
Return Parameter:
LOW | HIGH
Query Example:
CONFigure: EXTON:PULL?
Return Example:
LOW
5.6.2.3 SOURCE Subsystem
1. SOURce:VOLTage
Description:
Sets the output voltage.
Syntax:
SOURce:VOLTage <NRf+>[suffix]
Parameter:
Refer to individual spec for valid numeric range.
Example:
SOUR:VOLT 0.01 It sets the output voltage to 0.01 volt.
SOUR: VOLT 80.00 It sets the output voltage to 80.00 volt.
Query Syntax:
SOUR:VOLT? [{MAX | MIN}]
Return Parameter:
<NRf+> [Unit=Volt]
Query Example:
SOUR:VOLT? It returns the voltage.
SOUR:VOLT? MAX It returns the max. voltage can be set.
Return Example:
8.000000e+01
2. SOURce:VOLTage:LIMit:{HIGH/LOW}
Description:
Sets the output voltage range.
Syntax:
SOURce:VOLTage:LIMIT:HIGH <NRf+>[suffix]