Contents
x
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Editing Static Neighbors 7-26
Deleting Static Neighbors 7-26
Viewing and Clearing Dynamic Neighbors 7-27
Interface Configuration 7-27
Outside Interface Configuration - PPPoE 7-27
Outside Interface Configuration 7-28
Feature History for the Startup Wizard 7-29
CHAPTER
8 Configuring Interfaces 8-1
Information About Interfaces 8-1
ASA 5505 Interfaces 8-2
Understanding ASA 5505 Ports and Interfaces 8-2
Maximum Active VLAN Interfaces for Your License 8-2
VLAN MAC Addresses 8-4
Power over Ethernet 8-4
Monitoring Traffic Using SPAN 8-4
ASA 5580 Interfaces 8-5
Auto-MDI/MDIX Feature 8-5
Security Levels 8-5
Dual IP Stack 8-6
Management Interface (ASA 5510 and Higher) 8-6
Licensing Requirements for Interfaces 8-6
Guidelines and Limitations 8-7
Default Settings 8-8
Starting Interface Configuration (ASA 5510 and Higher) 8-9
Task Flow for Starting Interface Configuration 8-9
Enabling the Physical Interface and Configuring Ethernet Parameters 8-10
Configuring a Redundant Interface 8-12
Configuring a Redundant Interface 8-12
Changing the Active Interface 8-14
Configuring VLAN Subinterfaces and 802.1Q Trunking 8-14
Assigning Interfaces to Contexts and Automatically Assigning MAC Addresses (Multiple Context
Mode)
8-16
Starting Interface Configuration (ASA 5505) 8-16
Task Flow for Starting Interface Configuration 8-16
Configuring VLAN Interfaces 8-17
Configuring and Enabling Switch Ports as Access Ports 8-18
Configuring and Enabling Switch Ports as Trunk Ports 8-19
Completing Interface Configuration (All Models) 8-21
To Next Page
Loading...
Need help?
General
