Cisco Catalyst 3120

2-12
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
archive download-sw
source-url1 [sourceurl2
sourceurl3 sourceurl4]
The source URLs for the software images.
On a standalone switch, enter one source URL for the software image that
the switch supports.
In a switch stack, you can enter source URLs for the software images that
the stack members support as follows:
• Up to two source URLs without the /directory keyword.
• Up to four source URLS with the /directory keyword.
The image-name.tar is the software image to download and install on the
switch.
These options are supported:
• Local flash file system syntax on the standalone switch or the stack
master:
flash:
Local flash file system syntax on a stack member:
flash member number:
The member number can be from 1 to 9.
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/image-name.tar
• HTTP server syntax:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• Remote Copy Protocol (RCP) syntax:
rcp:[[//username@location]/directory]/image-name.tar
• Secure Copy Protocol (SCP) syntax for the:
scp:[[//username@location]/directory]/image-name.tar
• The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar