Cisco Catalyst 3120 Command Reference Guide

2-410
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show controllers ethernet-controller fastethernet
This is an example of output from the show controllers ethernet-controller fastethernet 0 stack
command on a stack member:
Switch# show controller ethernet-controller fastethernet 0 stack
Switch Interface-Name Duplex Speed Link-State Active-Link
-------------------------------------------------------------------
3 Fa0 a-full a-100 up
3 Fa0-Physical a-full a-100 up *
Related Commands Command Description
debug fastethernet Enables debugging of the Ethernet management port.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English