Cisco Catalyst 3120 - Page 705

2-677
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
stack-mac persistent timer
Examples This examples shows how to enable persistent MAC address:
Switch(config)# stack-mac persistent timer
You can verify your settings by entering the show running-config privileged EXEC command. If
enabled, stack-mac persistent timer is shown in the output.
Related Commands Command Description
show running-config Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command
_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.