Cisco Catalyst 3650

CHAPTER 5
Constraining IP Multicast in Switched Ethernet
•
Finding Feature Information, page 101
•
Prerequisites for Constraining IP Multicast in a Switched Ethernet Network, page 101
•
Information About IP Multicast in a Switched Ethernet Network, page 102
•
How to Constrain Multicast in a Switched Ethernet Network, page 104
•
Configuration Examples for Constraining IP Multicast in a Switched Ethernet Network, page 107
•
Where to Go Next for Constraining IP Multicast in Switched Ethernet, page 108
•
Additional References, page 108
•
Feature History and Information for Constraining IP Multicast in a Switched Ethernet Network, page
109
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Constraining IP Multicast in a Switched
Ethernet Network
Before using the tasks in this module, you should be familiar with the concepts described in the “IP Multicast
Technology Overview” module.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 101