Cisco Catalyst 3650 User Manual

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip igmp snooping querier
4.
ip igmp snooping querier address ip_address
5.
ip igmp snooping querier query-interval interval-count
6.
ip igmp snooping querier tcn query [count count | interval interval]
7.
ip igmp snooping querier timer expiry timeout
8.
ip igmp snooping querier version version
9.
end
10.
show ip igmp snooping vlan vlan-id
11.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Enables the IGMP snooping querier.ip igmp snooping querier
Example:
Device(config)# ip igmp snooping querier
Step 3
(Optional) Specifies an IP address for the IGMP snooping
querier. If you do not specify an IP address, the querier tries
to use the global IP address configured for the IGMP querier.
ip igmp snooping querier address ip_address
Example:
Device(config)# ip igmp snooping querier
Step 4
The IGMP snooping querier does not generate an
IGMP general query if it cannot find an IP address
on the device.
Note
address 172.16.24.1
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 75
Configuring IGMP
How to Configure IGMP Snooping

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094