Cisco Catalyst 3650

PurposeCommand or Action
Example:
Device> enable
•
Enter your password if prompted.
Enters global command mode.configure terminal
Example:
Device# configure terminal
Step 2
Enables MLD snooping.ipv6 mld snooping
Example:
Device(config)# ipv6 mld snooping
Step 3
Configuring IPv6 Snooping Policy (CLI)
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ipv6 snooping policy policy-name
4.
security-level guard
5.
device-role node
6.
protocol {dhcp | ndp}
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global command mode.configure terminal
Example:
Device# configure terminal
Step 2
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
220 OL-29890-01
Configuring Wireless Multicast
Configuring IPv6 Snooping Policy (CLI)