Cisco Catalyst 3650

DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Configures the minimum and the maximum backoff
intervals.
ip multicast rpf backoff minimum maximum [disable]
Example:
Device(config)# ip multicast rpf backoff 100 2500
Step 3
Related Topics
RPF Failover, on page 305
Example Configuring PIM RPF Failover Intervals, on page 311
Modifying the PIM Router Query Message Interval
Perform this task to modify the PIM router query message interval.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface type slot / subslot / port
4.
ip pim query-interval period [msec]
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
308 OL-29890-01
IP Multicast Optimization: Multicast Subsecond Convergence
Modifying the PIM Router Query Message Interval