Cisco Catalyst 3650 User Manual

•
Choose date on the device from the Year, Month, and Day drop-down list.
•
Choose time from the Hours, Minutes, and Seconds drop-down list.
•
Enter the time zone in the Zone text box and select the off setting required when compared to the current time
configured on the device from the Offset drop-down list.
The Save Wizard page appears.
Step 14
In the Save Wizard page, you can review the configuration settings performed on the device using these steps, and if
you wish to change any configuration value, click Previous and navigate to that page.
You can save the device configuration created using the wizard only if a success message is displayed for all the wizards.
If the Save Wizard page displays errors, you must recreate the wizard for initial configuration of the device.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 19
Using the Web Graphical User Interface
Configuring the Device Web GUI

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094