Cisco Catalyst 3650 User Manual

wireless configuration. Start the wizard through Configuration -> Wizard and follow the nine-step process to
configure the following:
•
Admin Users
•
SNMP System Summary
•
Management Port
•
Wireless Management
•
RF Mobility and Country code
•
Mobility configuration
•
WLANs
•
802.11 Configuration
•
Set Time
The Monitor tab:
•
Displays summary details of device, clients, and access points.
•
Displays all radio and AP join statistics.
•
Displays air quality on access points.
•
Displays list of all Cisco Discovery Protocol (CDP) neighbors on all interfaces and the CDP traffic
information.
•
Displays all rogue access points based on their classification-friendly, malicious, ad hoc, classified, and
unclassified.
The Configuration tab:
•
Enables you to configure the device for all initial operation using the web Configuration Wizard. The
wizard allows you to configure user details, management interface, and so on.
•
Enables you to configure the system, internal DHCP server, management, and mobility management
parameters.
•
Enables you to configure the device, WLAN, and radios.
•
Enables you to configure and set security policies on your device.
•
Enables you to access the device operating system software management commands.
The Administration tab enables you to configure system logs.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
14 OL-29890-01
Using the Web Graphical User Interface
Web GUI Features

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094