Cisco Catalyst 3650

CHAPTER 16
IP Multicast Optimization: SSM Channel Based
Filtering for Multicast
•
Finding Feature Information, page 335
•
Finding Feature Information, page 335
•
Prerequisites for SSM Channel Based Filtering for Multicast Boundaries, page 336
•
Information About the SSM Channel Based Filtering for Multicast Boundaries Feature, page 336
•
How to Configure SSM Channel Based Filtering for Multicast Boundaries, page 337
•
Configuration Examples for SSM Channel Based Filtering for Multicast Boundaries, page 338
•
Additional References, page 340
•
Feature History and Information for SSM Channel Based Filtering for Multicast Boundaries, page 340
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 335