EasyManuals Logo

Cisco Catalyst 3650 User Manual

Cisco Catalyst 3650
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #225 background imageLoading...
Page #225 background image
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip msdp originator-id type number
4.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Configures the RP address in SA messages to be the address
of the originating device’s interface.
ip msdp originator-id type number
Example:
Device(config)# ip msdp originator-id
ethernet 1
Step 3
Exits global configuration mode and returns to privileged
EXEC mode.
exit
Example:
Device(config)# exit
Step 4
Monitoring MSDP
Perform this optional task to monitor MSDP SA messages, peers, state, and peer status.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 203
Configuring MSDP
Monitoring MSDP

Table of Contents

Other manuals for Cisco Catalyst 3650

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3650 and is the answer not in the manual?

Cisco Catalyst 3650 Specifications

General IconGeneral
Switching Capacity160 Gbps
Uplink Interfaces4 x 1G SFP or 2 x 10G SFP+
Device TypeSwitch
Form FactorRack-mountable
LayerLayer 3
DRAM4 GB
Flash Memory4 GB
Operating SystemCisco IOS XE
ModelCatalyst 3650
Ports24 or 48 10/100/1000 Ethernet ports
StackingYes
Power over Ethernet (PoE)Yes
Power Supply Options350W AC
VLANs4094

Related product manuals