Cisco Catalyst 3650 User Manual

PurposeCommand or Action
Verifies your entries.show running-config
Example:
Device# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 7
startup-config
Limiting How Long an sdr Cache Entry Exists (CLI)
By default, entries are never deleted from the sdr cache. You can limit how long the entry remains active so
that if a source stops advertising SAP information, old advertisements are not unnecessarily kept.
This procedure is optional.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip sap cache-timeout minutes
4.
end
5.
show running-config
6.
show ip sap
7.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
264 OL-29890-01
Configuring IP Multicast Routing
Configuring sdr Listener Support

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094