Cisco Catalyst 3650 User Manual

DETAILED STEPS
PurposeCommand or Action
Obtains a brief description of the help system in any
command mode.
help
Example:
Device# help
Step 1
Obtains a list of commands that begin with a particular
character string.
abbreviated-command-entry ?
Example:
Device# di?
dir disable disconnect
Step 2
Completes a partial command name.
abbreviated-command-entry <Tab>
Example:
Device# sh conf<tab>
Device# show configuration
Step 3
Lists all commands available for a particular command
mode.
?
Example:
Device> ?
Step 4
Lists the associated keywords for a command.
command ?
Example:
Device> show ?
Step 5
Lists the associated arguments for a keyword.
command keyword ?
Example:
Device(config)# cdp holdtime ?
<10-255> Length of time (in sec) that receiver
Step 6
must keep this packet
Understanding Abbreviated Commands
You need to enter only enough characters for the device to recognize the command as unique.
This example shows how to enter the show configuration privileged EXEC command in an abbreviated form:
Device# show conf
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
4 OL-29890-01
Using the Command-Line Interface
Understanding Abbreviated Commands

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094