Cisco Catalyst 3650 User Manual

PurposeCommand or Action
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 8
startup-config
What to Do Next
Proceed to the other supported IP multicast routing procedures.
Related Topics
Multicast Boundaries, on page 254
Multicast Group Concept, on page 254
Example: Configuring an IP Multicast Boundary, on page 272
Monitoring and Maintaining IP Multicast Routing
Clearing Caches, Tables, and Databases
You can remove all contents of a particular cache, table, or database. Clearing a cache, table, or database
might be necessary when the contents of the particular structure are or suspected to be invalid.
You can use any of the privileged EXEC commands in the following table to clear IP multicast caches, tables,
and databases.
Table 21: Commands for Clearing Caches, Tables, and Databases
PurposeCommand
Deletes entries from the IGMP cache.
clear ip igmp group {group [ hostname | IP
address] | vrf name group [ hostname | IP
address] }
Clears all active IPv4 Multicast Forwarding Information
Base (MFIB) traffic counters.
clear ip mfib { counters [group | source] |
global counters [group | source] | vrf * }
IP multicast routing clear commands.
clear ip mrm {status-report [ source ] }
Deletes entries from the IP multicast routing table.
clear ip mroute { * | [hostname | IP address]
| vrf name group [ hostname | IP address] }
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
268 OL-29890-01
Configuring IP Multicast Routing
Monitoring and Maintaining IP Multicast Routing

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094