PurposeCommand or Action
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 7
startup-config
Changing the Maximum Query Response Time for IGMPv2 (CLI)
If you are using IGMPv2, you can change the maximum query response time advertised in IGMP queries.
The maximum query response time enables the device to quickly detect that there are no more directly
connected group members on a LAN. Decreasing the value enables the device to prune groups faster.
This procedure is optional.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface interface-id
4.
ip igmp query-max-response-time seconds
5.
end
6.
show ip igmp interface [interface-id]
7.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
42 OL-29890-01
Configuring IGMP
Changing the Maximum Query Response Time for IGMPv2 (CLI)
To Next Page
Loading...
Need help?
General
