Cisco Catalyst 3650

Configuration Examples for Using MSDP to Interconnect
Multiple PIM-SM Domains
Example: Configuring an MSDP Peer
The following example shows how to establish MSDP peering connections between three MSDP peers:
Device A
!
interface Loopback 0
ip address 10.220.8.1 255.255.255.255
!
ip msdp peer 10.220.16.1 connect-source Loopback0
ip msdp peer 10.220.32.1 connect-source Loopback0
!
Device B
!
interface Loopback 0
ip address 10.220.16.1 255.255.255.255
!
ip msdp peer 10.220.8.1 connect connect-source Loopback0
ip msdp peer 10.220.32.1 connect connect-source Loopback0
!
Device C
!
interface Loopback 0
ip address 10.220.32.1 255.255.255.255
!
ip msdp peer 10.220.8.1 connect 10.220.8.1 connect-source Loopback0
ip msdp peer 10.220.16.1 connect 10.220.16.1 connect-source Loopback0
!
Related Topics
MSDP Peers, on page 177
Configuring an MSDP Peer, on page 184
Shutting Down an MSDP Peer, on page 186
Example: Configuring MSDP MD5 Password Authentication
The following example shows how to enable MD5 password authentication for TCP connections between
two MSDP peers:
Device A
!
ip msdp peer 10.3.32.154
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 209
Configuring MSDP
Configuration Examples for Using MSDP to Interconnect Multiple PIM-SM Domains