Cisco Catalyst 3650 User Manual

PurposeCommand or Action
Administratively shuts down the specified MSDP peer.
ip msdp shutdown {peer-name | peer-address}
Example:
Device(config)# ip msdp shutdown 192.168.1.3
Step 3
--Repeat Step 3 to shut down additional MSDP peers.
Step 4
Exits global configuration mode and returns to
privileged EXEC mode.
end
Example:
Device(config)# end
Step 5
Related Topics
MSDP Peers, on page 177
Example: Configuring an MSDP Peer, on page 209
Configuring MSDP MD5 Password Authentication Between MSDP Peers
Perform this optional task to configure MSDP MD5 password authentication between MSDP peers.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip msdp password peer {peer-name | peer-address} [encryption-type] string
4.
exit
5.
show ip msdp peer [peer-address | peer-name]
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 187
Configuring MSDP
Configuring MSDP MD5 Password Authentication Between MSDP Peers

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094