Cisco Catalyst 3650 User Manual

You can also review the following IP Multicast Optimization processes for your configuration:
•
Optimizing PIM Sparse Mode in a Large IP Multicast Deployment
•
Multicast Subsecond Convergence
•
IP Multicast Load Splitting across Equal-Cost Paths
•
SSM Channel Based Filtering for Multicast
•
PIM Dense Mode State Refresh
•
IGMP State Limit
Additional References
Related Documents
Document TitleRelated Topic
IPv6 Configuration Guide
IPv6 addressing and connectivity
Cisco IOS Master Commands List,
All Releases
Cisco IOS commands
Cisco IOS IP Multicast Command
Reference
IP multicast commands
Cisco IOS IPv6 Command
Reference
IPv6 commands
Cisco IOS IPv6 Feature Mapping
Cisco IOS IPv6 features
Standards and RFCs
TitleStandard/RFC
IPv6 RFCs
RFCs for IPv6
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 213
Configuring MSDP
Additional References

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094