Cisco Catalyst 3650

CHAPTER 3
Configuring IGMP
•
Finding Feature Information, page 21
•
Restrictions for Configuring IGMP, page 21
•
Information About IGMP, page 22
•
How to Configure IGMP, page 34
•
Monitoring IGMP, page 78
•
Configuration Examples for IGMP, page 81
•
Where to Go Next for IGMP, page 86
•
Additional References, page 87
•
Feature History and Information for IGMP, page 88
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Restrictions for Configuring IGMP
The following are the restrictions for configuring IGMP:
•
The device supports IGMP Versions 1, 2 , and 3.
For IGMP Version 3, only IGMP Version 3 BISS (Basic IGMPv3 Snooping Support)
is supported.
Note
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 21