Modifying the IGMP Host-Query Message Interval (CLI) 38
Changing the IGMP Query Timeout for IGMPv2 (CLI) 40
Changing the Maximum Query Response Time for IGMPv2 (CLI) 42
Configuring the Device as a Statically Connected Member (CLI) 44
Configuring IGMP Profiles (CLI) 45
Applying IGMP Profiles (CLI) 47
Setting the Maximum Number of IGMP Groups (CLI) 49
Configuring the IGMP Throttling Action (CLI) 50
Configuring the Device to Forward Multicast Traffic in the Absence of Directly Connected
IGMP Hosts 53
Controlling Access to an SSM Network Using IGMP Extended Access Lists 54
How to Configure IGMP Snooping 57
Enabling or Disabling IGMP Snooping on a Device (CLI) 57
Enabling or Disabling IGMP Snooping on a VLAN Interface (CLI) 59
Setting the Snooping Method (CLI) 60
Configuring a Multicast Router Port (CLI) 61
Configuring a Host Statically to Join a Group (CLI) 62
Enabling IGMP Immediate Leave (CLI) 64
Configuring the IGMP Leave Timer (CLI) 65
Configuring the IGMP Robustness-Variable (CLI) 67
Configuring the IGMP Last Member Query Count (CLI) 68
Configuring TCN-Related Commands 70
Controlling the Multicast Flooding Time After a TCN Event (CLI) 70
Recovering from Flood Mode (CLI) 71
Disabling Multicast Flooding During a TCN Event (CLI) 73
Configuring the IGMP Snooping Querier (CLI) 74
Disabling IGMP Report Suppression (CLI) 77
Monitoring IGMP 78
Displaying IGMP Snooping Information 79
Displaying IGMP Filtering and Throttling Configuration 80
Configuration Examples for IGMP 81
Example: Configuring the Device as a Member of a Multicast Group 81
Example: Controlling Access to Multicast Groups 81
Examples: Configuring IGMP Snooping 81
Examples: Configuring Filtering and Throttling 82
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 v
Contents
To Next Page
Loading...
Need help?
General
