Default SettingFeature
•
Advertisement interval: 30 seconds for external peers; 5 seconds for
internal peers.
•
Change logging: Enabled.
•
Conditional advertisement: Disabled.
•
Default originate: No default route is sent to the neighbor.
•
Description: None.
•
Distribute list: None defined.
•
External BGP multihop: Only directly connected neighbors are
allowed.
•
Filter list: None used.
•
Maximum number of prefixes received: No limit.
•
Next hop (router as next hop for BGP neighbor): Disabled.
•
Password: Disabled.
•
Peer group: None defined; no members assigned.
•
Prefix list: None specified.
•
Remote AS (add entry to neighbor BGP table): No peers defined.
•
Private AS number removal: Disabled.
•
Route maps: None applied to a peer.
•
Send community attributes: None sent to neighbors.
•
Shutdown or soft reconfiguration: Not enabled.
•
Timers: keepalive: 60 seconds; holdtime: 180 seconds.
•
Update source: Best local address.
•
Version: BGP Version 4.
•
Weight: Routes learned through BGP peer: 0; routes sourced by the
local router: 32768.
Neighbor
Disabled
2
. If enabled, allows Layer 3 switches to continue forwarding
packets from a neighboring NSF-capable router during hardware or software
changes.
NSF
1
Awareness
None configured.Route reflector
Disabled.Synchronization (BGP and
IGP)
Disabled.Table map update
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
125
Configuring IP Unicast Routing
Default BGP Configuration
To Next Page
Loading...
