Cisco Catalyst 9500 Series User Manual

Configuring a Default MSDP Peer: Example 48
Caching Source-Active State: Example 49
Requesting Source Information from an MSDP Peer: Example 49
Controlling Source Information that Your Switch Originates: Example 49
Controlling Source Information that Your Switch Forwards: Example 49
Controlling Source Information that Your Switch Receives: Example 50
Feature Information for Multicast Source Discovery Protocol 50
CHAPTER 3 Configuring IP Unicast Routing 51
Information About Configuring IP Unicast Routing 52
Information About IP Routing 52
Types of Routing 53
Classless Routing 53
Address Resolution 55
Proxy ARP 55
ICMP Router Discovery Protocol 55
UDP Broadcast Packets and Protocols 56
Broadcast Packet Handling 56
IP Broadcast Flooding 57
How to Configure IP Routing 57
How to Configure IP Addressing 58
Default IP Addressing Configuration 59
Assigning IP Addresses to Network Interfaces 60
Using Subnet Zero 61
Disabling Classless Routing 62
Configuring Address Resolution Methods 63
Defining a Static ARP Cache 63
Setting ARP Encapsulation 65
Enabling Proxy ARP 66
Routing Assistance When IP Routing is Disabled 68
Proxy ARP 68
Default Gateway 68
ICMP Router Discovery Protocol (IRDP) 69
Configuring Broadcast Packet Handling 71
Enabling Directed Broadcast-to-Physical Broadcast Translation 71
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
v
Contents

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)