Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

5-14
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Chapter 5 Initial Configuration of the Cisco IOS XR Software
Creating and Modifying User Accounts and User Groups
Examples
In the following example, basic message logging is configured:
RP/0/RP0/CPU0:router# config
RP/0/RP0/CPU0:router(config)# logging 10.1.1.1
RP/0/RP0/CPU0:router(config)# logging trap debugging
RP/0/RP0/CPU0:router(config)# logging console emergencies
RP/0/RP0/CPU0:router(config)# logging buffered 1000000
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# end
RP/0/RP0/CPU0:router# show logging
Syslog logging: enabled (10 messages dropped, 0 flushes, 0 overruns)
Console logging: level debugging, 103 messages logged
Monitor logging: level debugging, 0 messages logged
Trap logging: level informational, 0 messages logged
Buffer logging: level debugging, 107 messages logged
Log Buffer (16384 bytes):
RP/0/RP0/CPU0:Apr 6 21:30:59.515 : alphadisplay[103][317]: alpha_display_drain_
queue: Draining 1 message from the queue of size = 1
RP/0/RP0/CPU0:Apr 6 21:31:03.099 : ingressq[227]: %INGRESSQ_DLL-3-HALF_DEPTH_PA
RT_DISCOVERED : ingressq dll: half depth memory detected, memory: DQ External QE
Memory
--More--
Related Documents
For more information on message logging and configuring alarm correlation, see the following Cisco
documents:
Creating and Modifying User Accounts and User Groups
In the Cisco IOS XR software, users are assigned individual usernames and passwords. Each username
is assigned to one or more user groups, each of which defines display and configuration commands the
user is authorized to execute. This authorization is enabled by default in the Cisco IOS XR software, and
each user must log in to the system using a unique username and password.
Related Topic Document Title
Configuration of system logging Cisco IOS Configuration Fundamental and Network Management
Configuration Guide, Release 12.3
Commands used to configure logging Cisco IOS XR Software System Management Command Reference
Configuration of alarm correlation and generating
complex queries
“Implementing and Monitoring Alarms and Alarm Log Correlation
on Cisco IOS XR Software” in the Cisco IOS XR System
Management Configuration Guide
Commands used to configure alarm correlation “Alarm Management and Logging Correlation Commands on
Cisco IOS XR Software” in the Cisco IOS XR System Management
Command Reference
Retrieve logging events through an XML interface Cisco CRS-1 Series Carrier Routing System XML API Guide

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English