Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

5-16
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Chapter 5 Initial Configuration of the Cisco IOS XR Software
Creating and Modifying User Accounts and User Groups
Figure 5-2 AAA Configuration Submodes
Predefined User Groups
The Cisco IOS XR software includes a set of predefined user groups that meet the needs of most
organizations. The predefined user groups are described in Table 5-6.
Although the predefined user groups are sufficient for the needs of most organizations, administrators
can configure their own groups. Refer to Configuring AAA Services on Cisco IOS XR Software in Cisco
IOS XR System Security Configuration.
116542
EXEC mode
Global configuration mode
AAA configuration submodes
Task group configuration submode
User group configuration submode
User login
taskgroup taskgroup-name
usergroup usergroup-name
username username
Username configuration submode
(commands)
Table 5-6 Predefined User Group Descriptions
User Group Privileges
root-system Ability to display and execute all commands for all logical routers
(LRs) in the system.
root-lr Ability to display and execute all commands within a single LR.
sysadmin Perform system administration tasks for the router, such as
maintaining where the core dumps are stored or setting up the NTP
clock.
netadmin Configure network protocols, such as Border Gateway Protocol (BGP)
and Open Shortest Path First (OSPF). This user group is usually
network administrators.
operator Perform day-to-day monitoring activities, and have limited
configuration rights.
cisco-support Ability to debug and troubleshooting features (usually Cisco support
personnel).

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English