Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

6-29
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Chapter 6 Managing Cisco IOS XR Software Packages
Package Management Procedures
Node 0/2/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Node 0/2/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Node 0/3/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Node 0/3/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Node 0/RP0/CPU0 [RP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/mbihfr-rp.vm
Active Packages:
disk0:hfr-rout-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Node 0/SM0/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
Removing Inactive Packages from the Router
To remove a package or SMU from the router, you must first deactivate the package, and commit the new
active software set so it does not include the package. The three steps to remove inactive software are as
follows:
1. install deactivate package
2. install commit
3. install remove package

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English