B-7
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Appendix B Upgrading and Downgrading ROM Monitor Software
Configuration Examples for ROM Monitor Upgrades
ROM Monitor Upgrade: Example
The following example shows a ROMMONB upgrade on a router with a single RP:
RP/0/RP0/CPU0:Router# show diag
NODE 0/0/SP : MSC(SP)
MAIN: type 500060, 0800-019840-1033 rev 01 dev 010cd8
HW version 0.0 S/N SAD07290129
PCA: 0073-007648-04 rev 08
Board State : IOS-XR RUN
PLD: Motherboard: 0xf425, Processor: 0x0000, Power: N/A
MONLIB: QNXFFS Monlib Version 2.2
ROMMON: Version 1.15(20040603:013227) [CRS-1 ROMMON]
NODE 0/0/CPU0 : MSC(16OC48-POS/DPT)
MAIN: type 500060, 0800-019840-1033 rev 01 dev 010cd8
HW version 0.0 S/N SAD07290129
PCA: 0073-007648-04 rev 08
Board State : IOS-XR RUN
PLD: Motherboard: 0x0025, Processor: 0xda13, Power: N/A
MONLIB: QNXFFS Monlib Version 2.2
ROMMON: Version 1.15(20040603:013406) [CRS-1 ROMMON]
NODE 0/2/SP : 4OC192-POS/DPT PLIM PRESENT
NODE 0/3/SP : MSC(SP)
MAIN: type 500060, 0800-025021-259 rev 01 dev 000000
HW version 0.0 S/N SAD074907X6
PCA: 0073-007648-06 rev 11
Board State : IOS-XR RUN
PLD: Motherboard: 0xfa25, Processor: 0x0000, Power: N/A
MONLIB: QNXFFS Monlib Version 2.2
ROMMON: Version 1.15(20040603:013227) [CRS-1 ROMMON]
NODE 0/3/CPU0 : MSC(16OC48-POS/DPT)
MAIN: type 500060, 0800-025021-259 rev 01 dev 000000
HW version 0.0 S/N SAD074907X6
PCA: 0073-007648-06 rev 11
Board State : IOS-XR RUN
PLD: Motherboard: 0x0025, Processor: 0xda13, Power: N/A
MONLIB: QNXFFS Monlib Version 2.2
ROMMON: Version 1.15(20040603:013406) [CRS-1 ROMMON]
NODE 0/RP0/CPU0 : RP
MAIN: type 100000, 0000-000000-00 rev 01 dev 000000
HW version 0.0 S/N SAD07150223
PCA: 0073-007641-04 rev 05
Board State : IOS-XR RUN
PLD: Motherboard: 0x0018, Processor: 0xda13, Power: 0x001f
MONLIB: QNXFFS Monlib Version 2.1
ROMMON: Version 1.15(20040603:013406) [CRS-1 ROMMON]
To Next Page
Loading...
Need help?
General
