Cisco XR 1200 series User Manual

show event manager directory user
To display the current value of the EEM user library files or user-defined Embedded Event Manager (EEM)
policies, use the show event manager directory user command in EXEC mode.
show event manager directory user {library| policy}
Syntax Description
Specifies the user library files.library
Specifies the user-defined EEM policies.policy
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The show fault manager userlibdirectory and show fault manager
userpolicydirectory commands were replaced with the show event
manager directory user command.
Release 3.6.0
Task ID was changed from fault-mgr to eem.Release 3.7.0
Usage Guidelines
Use the show event manager directory user command to display the current value of the EEM user library
or policy directory.
Task ID
OperationsTask ID
readeem
Examples
This is a sample output of the show event manager directory user command:
RP/0/0/CPU0:router# show event manager directory user library
disk0:/fm_user_lib_dir
RP/0/0/CPU0:router# show event manager directory user policy
disk0:/fm_user_pol_dir
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
90 OL-24735-01
Embedded Event Manager Commands
show event manager directory user

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English