Cisco XR 1200 series User Manual

reaction operation
To configure certain actions that are based on events under the control of the IP SLA agent, use the reaction
operation command in IP SLA configuration mode.To remove the reaction so that no reaction occurs, use
the no form of this command.
reaction operation operation-id
no reaction operation operation-id
Syntax Description
Number of the IP SLA operation for the reactions to be configured. Range
is 1 to 2048.
operation-id
Command Default
No reaction is configured.
Command Modes
IP SLA configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the reaction operation command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 1
RP/0/0/CPU0:router(config-ipsla-react)#
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 199
IP Service Level Agreement Commands
reaction operation

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English