EasyManuals Logo

Cisco XR 1200 series User Manual

Cisco XR 1200 series
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
reparent Specify reparent of alarm on parent clear
rootcause Specify root cause alarm: Category/Group/Code combos
timeout Specify timeout
timeout-rootcause Specify timeout for root-cause
RP/0/0/CPU0:router(config-corr-rule-st)#
Below are the rule parameters that are available while in nonstateful correlation rule configuration mode:
RP/0/0/CPU0:router(config-corr-rule-nonst)# ?
context-correlation Specify enable correlation on context
nonrootcause nonrootcause alarm
rootcause Specify root cause alarm: Category/Group/Code combos
timeout Specify timeout
timeout-rootcause Specify timeout for root-cause
RP/0/0/CPU0:router(config-corr-rule-nonst)#
A rule cannot be deleted or modified while it is applied, so the no logging correlator apply command
must be used to unapply the rule before it can be changed.
Note
The name of the correlation rule must be unique across all rule types and is limited to a maximum length
of 32 characters.
Note
Use the show logging correlator buffer, on page 47 to display messages stored in the logging correlator
buffer.
Use the show logging correlator rule, on page 52 command to verify correlation rule settings.
Task ID
OperationsTask ID
read, writelogging
Examples
This example shows how to enter stateful correlation rule configuration mode to specify a collection duration
period time for correlator messages sent to the logging events buffer:
RP/0/0/CPU0:router(config)# logging correlator rule state_rule type stateful
RP/0/0/CPU0:router(config-corr-rule-st)# timeout 50000
Related Commands
DescriptionCommand
Applies and activates correlation rules.logging correlator apply rule, on page 15
Enters non-root-cause configuration mode and
specifies a non-root-cause alarm.
nonrootcause, on page 39
Reissues non-bistate alarm messages (events) from
the correlator log after its root-cause alarm clears.
reissue-nonbistate, on page 41
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 23
Alarm Management and Logging Correlation Commands
logging correlator rule

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco XR 1200 series and is the answer not in the manual?

Cisco XR 1200 series Specifications

General IconGeneral
BrandCisco
ModelXR 1200 series
CategoryNetwork Router
LanguageEnglish

Related product manuals