Cisco XR 1200 series User Manual

show ipsla application
To display the information for the IP SLA application, use the show ipsla application command in EXEC
mode.
show ipsla application
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
readmonitor
Examples
The following sample output is from the show ipsla application command:
RP/0/0/CPU0:router# show ipsla application
Estimated system max number of entries: 2048
Number of Entries configured: 1
Number of active Entries : 0
Number of pending Entries : 0
Number of inactive Entries : 1
Supported Operation Types: 7
Type of Operation: ICMP ECHO
Type of Operation: ICMP PATH JITTER
Type of Operation: ICMP PATH ECHO
Type of Operation: UDP JITTER
Type of Operation: UDP ECHO
Type of Operation: MPLS LSP PING
Type of Operation: MPLS LSP TRACE
Number of configurable probes : 2047
SA Agent low memory water mark: 20480 (KB)
This table describes the significant fields shown in the display.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 219
IP Service Level Agreement Commands
show ipsla application

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English