low-memory
low-memory value
no low-memory
Syntax Description
Low-memory watermark value. Range is 0 to 4294967295.
value
Command Default
The default value is 20 MB (free memory).
Command Modes
IP SLA configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
IP SLA ensures that the system provides the specified memory before adding new operations or scheduling
the pending operation.
When the 0 value is used, no memory limitation is enforced.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the low-memory command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# low-memory 102400
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Displays the information for the IP SLA application.show ipsla application, on page 219
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
158 OL-24735-01
IP Service Level Agreement Commands
low-memory
To Next Page
Loading...
