Cisco XR 1200 series User Manual

show event manager metric process
To display the Embedded Event Manager (EEM) reliability metric data for processes, use the show event
manager metric process command in EXEC mode.
show event manager metric process {all| job-id| process-name} location {all| node-id}
Syntax Description
Specifies all the processes.all
Process associated with this job identifier. The value ranges from 0-4294967295.
job-id
Process associated with this name.
process-name
Specifies the location of the node.location
Displays hardware reliability metric data for all the nodes.all
Hardware reliability metric data for a specified node. Displays detailed Cisco
Express Forwarding information for the designated node. The node-id argument
is entered in the rack/slot/module notation.
node-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The show fault manager metric process command was replaced with
the show event manager metric process command.
Release 3.6.0
Task ID was changed from fault-mgr to eem.Release 3.7.0
Usage Guidelines
The system maintains a record of when processes start and end. This data is used as the basis for reliability
analysis.
Use the show event manager metric process command to obtain availability information for a process or
group of processes. A process is considered available when it is running.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
96 OL-24735-01
Embedded Event Manager Commands
show event manager metric process

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English