Cisco XR 1200 series User Manual

clear logging correlator delete
To delete all messages or messages specified by a correlation ID from the logging correlator buffer, use the
clear logging correlator delete command in EXEC mode.
clear logging correlator delete {all-in-buffer| correlation-id}
Syntax Description
Clears all messages in the logging correlator buffer.all-in-buffer
Correlation event record ID. Up to 14 correlation IDs can be specified,
separated by a space. Range is 0 to 4294967294.
correlation-id
Command Default
No messages are automatically deleted unless buffer capacity is reached.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Use the show logging correlator buffer, on page 47 command to confirm that records have been cleared.
Use the logging correlator buffer-size, on page 20 command to configure the capacity of the logging correlator
buffer.
Task ID
OperationsTask ID
executelogging
Examples
This example shows how to clear all records from the logging correlator buffer:
RP/0/0/CPU0:router# clear logging correlator delete all-in-buffer
Related Commands
DescriptionCommand
Displays messages in the logging correlator buffer.show logging correlator buffer, on page 47
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
6 OL-24735-01
Alarm Management and Logging Correlation Commands
clear logging correlator delete

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English