show snmp correlator ruleset
To display defined SNMP correlation rule set names, use the show snmp correlator ruleset command in
EXEC mode.
show snmp correlator ruleset [all| ruleset-name]
Syntax Description
Displays all rule set names.all
Specifies the name of a rule set. Up to 14 predefined rule set names can be
specified, separated by a space.
ruleset-name
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
Task ID
OperationTask ID
readsnmp
Examples
This sample shows an output from the show snmp correlator ruleset command:
RP/0/0/CPU0:router# show snmp correlator ruleset test
Rule Set Name : test
Rules: chris1 : Not Applied
chris2 : Applied
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
70 OL-24735-01
Alarm Management and Logging Correlation Commands
show snmp correlator ruleset