Cisco XR 1200 series User Manual

buckets (history)
To set the number of history buckets that are kept during the lifetime of the IP SLA operation, use the buckets
command in IP SLA operation history configuration mode. To use the default value, use the no form of this
command.
buckets buckets
no buckets
Syntax Description
Number of history buckets that are kept during the lifetime of an IP SLA operation.
Range is 1 to 60.
buckets
Command Default
The default value is 15 buckets.
Command Modes
IP SLA operation history configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
The buckets command is supported only to configure the following operations:
•
IP SLA ICMP path-echo
•
IP SLA ICMP echo
•
IP SLA UDP echo
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the buckets command in IP SLA UDP echo configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp echo
RP/0/0/CPU0:router(config-ipsla-udp-echo)# history
RP/0/0/CPU0:router(config-ipsla-op-hist)# buckets 30
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 121
IP Service Level Agreement Commands
buckets (history)

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English