show event manager environment
To display the names and values of the Embedded Event Manager (EEM) environment variables, use the
show event manager environment command in EXEC mode.
show event manager environment [all| environment-name]
Syntax Description
(Optional) Specifies all the environment variables.all
(Optional) Environment variable for which data is displayed.
environment-name
Command Default
All environment variables are displayed.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The show fault manager environment command was replaced with
the show event manager environment command.
Release 3.6.0
Usage Guidelines
Use the show event manager environment command to display the names and values of the EEM environment
variables.
Task ID
OperationsTask ID
readeem
Examples
This is a sample output of the show event manager environment command:
RP/0/0/CPU0:router# show event manager environment
No. Name Value
1 _email_cc
2 _email_to mosnerd@cisco.com
3 _show_cmd show event manager policy registered
4 _cron_entry 0-59/2 0-23/1 * * 0-7
5 _email_from mosnerd@cisco.com
6 _email_server zeta@cisco.com
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
92 OL-24735-01
Embedded Event Manager Commands
show event manager environment
To Next Page
Loading...
