Cisco XR 1200 series User Manual

schedule operation
To enter schedule configuration mode, use the schedule operation command in IP SLA configuration mode.
To remove the scheduler, use the no form of this command.
schedule operation operation-number
no schedule operation operation-number
Syntax Description
Configuration number or schedule number that is used to schedule an IP
SLA operation. Range is 1 to 2048.
operation-number
Command Default
None
Command Modes
IP SLA configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
The schedule operation command enters the IP SLA schedule configuration mode. You can configure more
schedule configuration parameters to schedule the operation. When an operation is scheduled, it continues
collecting information until the configured life expires.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the ipsla schedule operation command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)#
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 215
IP Service Level Agreement Commands
schedule operation

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English