Cisco XR 1200 series User Manual

show logging history
To display information about the state of the system logging (syslog) history table, use the show logging
history command in EXEC mode.
show logging history
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Use the show logging history command to display information about the syslog history table, such as the
table size, the status of messages, and the text of messages stored in the table. Simple Network Management
Protocol (SNMP) configuration parameters and protocol activity also are displayed.
Use the logging history, on page 325 command to change the severity level of syslog messages stored in the
history file and sent to the SNMP server.
Use the logging history size, on page 327 to change the number of syslog messages that can be stored in the
history table.
Task ID
OperationsTask ID
readlogging
Examples
This is the sample output from the show logging history command:
RP/0/0/CPU0:router# show logging history
Syslog History Table: '1' maximum table entries
saving level 'warnings' or higher
137 messages ignored, 0 dropped, 29 table entries flushed
SNMP notifications disabled
This table describes the significant fields shown in the display.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
348 OL-24735-01
Logging Services Commands
show logging history

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English