show ipsla mpls discovery vpn
To display routing information relating to the BGP next-hop discovery database in the MPLS VPN network,
use the show ipsla mpls discovery vpn command in EXEC mode.
show ipsla mpls discovery vpn
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
Task ID
OperationsTask ID
readmonitor
Examples
The following sample output is from the show ipsla mpls discovery vpn command:
RP/0/0/CPU0:router# show ipsla mpls discovery vpn
Next refresh after: 46 seconds
BGP next hop Prefix VRF PfxCount
192.255.0.4 192.255.0.4/32 red 10
blue 5
green 7
192.255.0.5 192.255.0.5/32 red 5
green 3
192.254.1.6 192.254.1.0/24 yellow 4
This table describes the significant fields shown in the display.
Table 17: show ipsla mpls discovery vpn Field Descriptions
DescriptionField
Identifier for the BGP next-hop neighbor.BGP next hop
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
224 OL-24735-01
IP Service Level Agreement Commands
show ipsla mpls discovery vpn
To Next Page
Loading...
