Cisco XR 1200 series User Manual

threshold
To set the lower-limit and upper-limit values, use the threshold command in IP SLA reaction condition
configuration mode. To use the default value, use the no form of this command.
threshold lower-limit value upper-limit value
no threshold lower-limit value upper-limit value
Syntax Description
Specifies the threshold lower-limit value. Range is 1 to 4294967295 ms.
Default lower-limit value is 3000 ms.
lower-limit value
Specifies the threshold upper-limit value. Range is 5000 to 4294967295 ms.
Default upper-limit value is 5000 ms.
upper-limit value
Command Default
lower-limit value: 3000 ms
upper-limit value: 5000 ms
Command Modes
IP SLA reaction condition configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
The threshold command is supported only when used with the react command and jitter-average and
packet-loss keywords.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to set the lower-limit and upper-limit values for the react command with
the jitter-average keyword for the threshold command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react jitter-average
RP/0/0/CPU0:router(config-ipsla-react-cond)# threshold lower-limit 8000 upper-limit 10000
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 267
IP Service Level Agreement Commands
threshold

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English