Cisco XR 1200 series User Manual

show event manager metric hardware
To display the Embedded Event Manager (EEM) reliability data for the processes running on a particular
node, use the show event manager metric hardware command in EXEC mode.
show event manager metric hardware location {node-id| all}
Syntax Description
Specifies the location of the node.location
EEM reliability data for the specified node. The node-id argument is entered
in the rack/slot/module notation.
node-id
Specifies all the nodes.all
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The show fault manager metric hardware command was replaced
with the show event manager metric environment command.
Release 3.6.0
Usage Guidelines
Task ID
OperationsTask ID
readeem
Examples
This is a sample output of the show event manager metric hardware command:
RP/0/0/CPU0:router# show event manager metric hardware location 0/0/CPU0
=====================================
node: 0/0/CPU0
Most recent online: Mon Sep 10 21:45:02 2007
Number of times online: 1
Cumulative time online: 0 days, 09:01:07
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
94 OL-24735-01
Embedded Event Manager Commands
show event manager metric hardware

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English