Cisco XR 1200 series User Manual

source address
To identify the address of the source device, use the source address command in the appropriate configuration
mode. To use the best local address, use the no form of this command.
source address ipv4-address
no source address
Syntax Description
IP address or hostname of the source device.
ipv4-address
Command Default
IP SLA finds the best local address to the destination and uses it as the source address.
Command Modes
IP SLA UDP echo configuration
IP SLA UDP jitter configuration
IP SLA ICMP path-jitter configuration
IP SLA ICMP path-echo configuration
IP SLA ICMP echo configuration
IP SLA MPLS LSP ping configuration
IP SLA MPLS LSP trace configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Support was added for IP SLA MPLS LSP Ping and IP SLA MPLS
LSP Trace configuration modes.
Release 3.4.0
Usage Guidelines
Task ID
OperationsTask ID
read, writemonitor
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
250 OL-24735-01
IP Service Level Agreement Commands
source address

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English