all-of-router
To apply a logging suppression rule to alarms originating from all locations on the router, use the all-of-router
command in logging suppression apply rule configuration mode.
all-of-router
Syntax Description
This command has no keywords or arguments.
Command Default
No scope is configured by default.
Command Modes
Logging suppression apply rule configuration
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
Task ID
OperationsTask ID
executelogging
Examples
This example shows how to apply the logging suppression rule “commit” to all locations on the router:
RP/0/0/CPU0:router(config)# logging suppress apply rule commit
RP/0/0/CPU0:router(config-suppr-apply-rule)# all-of-router
Related Commands
DescriptionCommand
Applies and activates a logging suppression rule.logging suppress apply rule, on page 35
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 5
Alarm Management and Logging Correlation Commands
all-of-router
To Next Page
Loading...
