Cisco XR 1200 series User Manual

history
To configure the history parameters for the IP SLA operation, use the history command in the appropriate
configuration mode. To use the default value, use the no form of this command.
history [buckets buckets| filter {all| failures}| lives lives]
no history
Syntax Description
Sets the number of history buckets that are kept during the lifetime of the IP SLA
operation.
buckets
Number of history buckets that are kept during the lifetime of an IP SLA operation.
Range is 1 to 60.
buckets
Defines the type of information that is kept in the history table for the IP SLA
operation.
filter
Stores history data for all operations, if set.all
Stores data for operations that failed, if set.failures
Sets the number of lives that are maintained in the history table for an IP SLA
operation.
lives
Number of lives that are maintained in the history table for an IP SLA operation.
Range is 0 to 2.
lives
Command Default
None
Command Modes
IP SLA UDP echo configuration
IP SLA UDP jitter configuration
IP SLA ICMP path-jitter configuration
IP SLA ICMP path-echo configuration
IP SLA ICMP echo configuration
IP SLA MPLS LSP ping configuration
IP SLA MPLS LSP trace configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
146 OL-24735-01
IP Service Level Agreement Commands
history

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English