Cisco XR 1200 series User Manual

ModificationRelease
Support was added for IP SLA MPLS LSP ping and IP SLA MPLS
LSP trace configuration modes.
Release 3.4.0
Usage Guidelines
The history command enters IP SLA operation history configuration mode in which you can configure more
history configuration parameters.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the history command in IP SLA UDP echo configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp echo
RP/0/0/CPU0:router(config-ipsla-udp-echo)# history
RP/0/0/CPU0:router(config-ipsla-op-hist)#
Related Commands
DescriptionCommand
Sets the number of history buckets that are kept during
the lifetime of the IP SLA operation.
buckets (history), on page 121
Defines the type of information that are kept in the
history table for the IP SLA operation.
filter, on page 140
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Sets the number of lives that are maintained in the
history table for an IP SLA operation.
lives, on page 156
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 147
IP Service Level Agreement Commands
history

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English