Cisco XR 1200 series User Manual

event manager refresh-time
To define the time between user authentication refreshes in Embedded Event Manager (EEM), use the event
manager refresh-time command in global configuration mode. To restore the system to its default condition,
use the no form of this command.
event manager refresh-time seconds
no event manager refresh-time seconds
Syntax Description
Number of seconds between user authentication refreshes, in seconds. Range is 10
to 4294967295.
seconds
Command Default
The default refresh time is 1800 seconds (30 minutes).
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
The fault manager refresh-time command was replaced with the
event manager refresh-time command.
Release 3.6.0
Task ID was changed from fault-mgr to eem.Release 3.7.0
Usage Guidelines
EEM attempts to contact the AAA server and refresh the username reauthentication whenever the configured
refresh-time expires.
Task ID
OperationsTask ID
read, writeeem
Examples
This example shows how to set the refresh time:
RP/0/0/CPU0:router(config)# event manager refresh-time 1900
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 85
Embedded Event Manager Commands
event manager refresh-time

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English